How to choose the bicycle gear

In general, the higher the gear is, the harder it is to pedal and the faster the speed is. On the contrary, the lower the gear is, the easier it is to pedal and the slower the speed is.Generally according to the following method to adjust the gear.

1, usually riding flat road advice 2*6 (that is, the front of the tooth disc to the second gear, the back of the flywheel to the sixth gear), the back of the gear can also be adjusted to five or seven gear, if tired to the back of the gear low point.

2. You can reduce the gear of the rear flywheel on an uphill slope, 2*3. On steeper slopes, you can switch to 2*1, or switch the front flywheel to 1 first, and then the rear flywheel to 2 or 3.

3, downhill, downhill remember to shift the gear a little higher, so as not to cause air tramp when the speed is fast, so it is easy to lose control of the car, causing danger, especially when the steep downhill sharp turning.

4. If the riding speed needs to reach more than 25 speed, the front tooth disc can be adjusted to 3 gear, and the back gear can be adjusted according to the actual speed. Such speed is very fast.

微信图片_2021061611170426


Post time: Jun-25-2021